Nascent Pipe & Tubes Mumbai, Maharashtra

Send SMS
Contact Us

Pipes And Tubes

Stainless Steel ERW Pipe

Stainless Steel ERW Pipe

Approx. Rs 185 / Kilogram

Pipes/Tubes: (seamless/welded (erw),pickling/polished)

Materials:200,201,201H,202,301,304,304L/H,316L/Ti,317/L,321/H,347H,309S,310S,904L,S31803/2205,400 series,600 series,800series, Duplex, Super Duplex etc.

Outer Diameter: 6 – 630mm(NPS 1/8”- 24”)

Wall Thickness: 0.5-50 mm

Executed standard: ISO, ASTM, DIN, IDF, JIS and Non-standard etc.


Any response will be highly appreciated.

Additional Information:

Stainless Steel Polish Pipes

Stainless Steel Polish Pipes

Approx. Rs 175 / Kilogram

We are the manufacturers of stainless steel polish pipes in the form round, square, rectangle, oval.

we manufacture the below mentioned stainless steel polish pipes, we manufacture polish pipes in different types. stainless steel polish pipes in 600 grit, 400 grit, 320 grit.

we also manufacture pipes in matt finish, satin finish.

stainless steel polish pipes in 201 grade.
stainless steel polish pipes in 202 grade.
stainless steel polish pipes in 304 grade.
stainless steel polish pipes in 316 grade.
stainless steel polish pipes in 310 grade.
stainless steel polish pipes in 409 grade.
stainless steel polish pipes in 410 grade.
stainless steel polish pipes in 420 grade.

Additional Information:

Stainless Steel 304 Polish Pipes

Stainless Steel 304 Polish Pipes

Approx. Rs 175 / Kilogram

We are manufacturer of Stainless Steel, Carbon Steel, Alloy Steel, Copper, Brass, Titanium, Duplex, Super Duplex in form of Pipes & Tubes in various size and thickness.

We are specialists in 304 polished Pipes mainly used for furniture & decorative purpose.

Additional Information:

Duplex Steel Pipe

Duplex Steel Pipe

Approx. Rs 350 / Kilogram

Duplex Pipe was originally developed in Sweden back in the 1940’s . Duplex Pipes were originally created to combat corrosion problems caused by chloride-bearing cooling waters and other aggressive chemical process fluids.
Called Duplex Pipe because of its mixed microstructure with about equal proportions of ferrite and austenite, duplex stainless steels are a family of grades, which range in corrosion performance depending on their alloy content. The chemical composition based on high contents of Cr and Mo, improves intergranular and pitting corrosion resistance, respectively. Additions of nitrogen can promote structural hardening by interstitial solid solution mechanism, which raises the yield strength and ultimate strength values without impairing toughness. Moreover, the two-phase microstructure guarantees higher resistance to pitting and stress corrosion cracking in comparison with conventional stainless steels.

The first-generation grades were alloys of chromium, nickel and molybdenum and while they provided good performance characteristics, welds had low toughness due to excessive ferrite, which limited the use of Duplex pipe steel to a few specific applications.


ASTM A 182, A 240, A 276, A 789, A 790, A 815
UNS S31803, S32205

Additional Information:

Stainless Steel 904 L Pipe

Stainless Steel 904 L Pipe

Approx. Rs 250 / Kilogram

Cupro Nickel Pipes

Cupro Nickel Pipes

Approx. Rs 1,000 / Kilogram

In the wake of the ever rising demand for reliable products, we are engaged in offering a wide assortment of Cupro nickel pipes. We are considered as a specialist in offering a huge gamut of cupro nickel pipes to our clients. Our product range includes all specific grades. This superior quality Cupro nickel pipes is being designed and engineered by making use of fines grade basic materials, coupled with latest technology.

Steel Tubes

Steel Tubes

Approx. Rs 250 / Kilogram

Stainless Steel Pipe & Tube

Stainless steel pipe has many remarkable attributes including corrosion resistance, high strength, durability, and machinability. NEHA METAL AND ALLOYS offers stainless steel pipe and tube in both seamless and welded specifications. Our stainless steel products are available in outer diameters (OD) of ¼” – 48” and wall thicknesses up through 1.500"

Carbon Pipe & Tube

Carbon steel is more commonly used than any other metal, and has long been admired for its versatility and low cost. As a specialist in scheduled and non-scheduled heavy wall pipe and tube, NEHA METAL AND ALLOYS stocks a complete size range of carbon steel pipe and tube. We offer multiple grades of carbon steel covered by ASTM, ASME and API specifications..


NEHA METAL AND ALLOYS stock seamless nickel tubing for both aerospace and commercial applications. Nickel base alloys offer high strength, high temperature and heat resistance.

Many of our tubing products are supplied for applications in the following industries:


Alloy designations:

Alloy 20, 200, C-276, 400, 600, 625, 718, and HX

Alloy Pipe & Tube

The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance, toughness, and wear resistance. As suppliers of alloy steel seamless and welded pipe, NEHA METAL AND ALLOYS specializes in "chrome moly" piping used extensively in power plants throughout the world. Our wide selection of SA335 pipe is available in grades P5, P9, P11, P22

Additional Information:

Carbon Steel Pipes

Carbon Steel Pipes

Approx. Rs 70 / Kilogram



NPS 1/4"- 30"
Schedules 10 through 160, STD, XH and XXH

*Total of Cr, Cu, Mo, Ni, and V shall not exceed 1%

Permissible Variations in Wall Thickness

The minimum wall thickness at any point shall not be more than 12.5% under the nominal wall thickness specified.


Killed steel, with primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining.

Steel cast in ingots or strand cast is permissible.

Hot-finished pipe need not be heat treated.

Cold-drawn pipe shall be heat treated after the final cold draw pass.

Permissible Variations in Weights per Foot

Weight of any length shall not vary more than 10% over and 3.5% under that specified. NOTE -- NPS 4 and smaller -- weighed in lots. Larger sizes shall be weighed separately by length.





Grade A

Grade B

Grade C

Mechanical Tests Specified

Tensile Test -- NPS 8 and larger -- either transverse or longitudinal acceptable Smaller than NPS 8 -- weighed in lots. Larger sizes -- by length. Flattening Test -- NPS 2-1/2 and larger. Bending Test (Cold) -- NPS 2 and under.


Lengths required shall be specified on order. No "jointers" permitted unless otherwise specified. If no definite lengths required, following practice applies: Single Random -- 17' ~ 24' lengths Double Random -- 36' ~ 44' lengths

Referenced Documents

ASTM A 530/A 530M Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

ASTM E 213 Practice for Ultrasonic Examination of Metal Pipe and Tubing

ASTM E 309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation

ASTM E 381 Method of Macroetch testing Steel Bars, Billets, Blooms, and Forgings

ASTM E 570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

ASME B26.10M Welded and Seamless Wrought Steel Pipe

General Information

Orders for material under this specification should include the following, as required, to describe the desired material adequately:



Feet, centimeters, or number of lengths

Name of material

Seamless or Welded Pipe


Grade A, Grade B, or Grade C


Hot-finished or cold-drawn


NPS or Outside Diameter and Schedule Number of Average Wall Thickness

Special outside diameter tolerance pipe

Inside diameter tolerance pipe, over 10 in ID


Specific or random

Supplementary requirements

Test Report Required

Specification designation

Hydrostatic test

Special requirements

Additional Information:

Alloy Steel Tube

Alloy Steel Tube

Approx. Rs 250 / Kilogram

We are the Leading Suppliers & exporters of Alloy Steel Tube. Our range of Alloy Steel Tube is appreciated for their excellent features such as durability, corrosion resistance and high tensile strength.

Stainless Steel Perforated Pipes

Stainless Steel  Perforated Pipes

Approx. Rs 250 / Kilogram

We are the leading manufacturers stainless steel pipes, we also specialize in manufacturing stainless steel perfoarated pipes in different sizes accordind to the requirement in the desired length.

Perforated pipes in 304 grade
perforated pipes in 316 grade

We also give a mirror finish to the perforated pipes upto 600 grit.

perforated polish pipes in all grades and sizes.

Inconel Pipe

Inconel Pipe

Approx. Rs 2,500 / Kilogram

Stock Pipe & Fittings
AL-6XN Pipe Stock Size:
Sch10 & Sch40 thru 12" AL-6XN Fittings/Flanges: thru 8"

Specifications: UNS N08367
ASME SB-688, ASME SA-240, ASME SB-675, ASME SA-312, ASME SB-676, ASME SA-249, ASME SB-691, ASME SA-479, ASME SB-462, ASME SA-182, ASME SB-564, ASME SB-366
ASTM B688, ASTM A240, ASTM B675, ASTM A312, ASTM B676, ASTM A249, ASTM B804, ASTM B691, ASTM A479, ASTM B462, ASTM A182, ASTM B564, ASTM B366, ASTM B472
NACE MR-0175


High temperature metals or high temp alloys consist of Inconel/Incoloy, Nickel and Superalloys.


Inconel metals are difficult metals to shape and machine using traditional techniques due to rapid work hardening. After the first machining pass, work hardening tends to plastically deform either the workpiece or the tool on subsequent passes. For this reason, age-hardened Inconels such as 718 are machined using an aggressive but slow cut with a hard tool, minimizing the number of passes required. Alternatively, the majority of the machining can be performed with the workpiece in a solutionized form, with only the final steps being performed after age-hardening. External threads are machined using a lathe to "single point" the threads, or by rolling the threads using a screw machine. Holes with internal threads are made by welding or brazing threaded inserts made of stainless steel. Cutting of plate is often done with a waterjet cutter. Internal threads can also be cut by single point method on lathe, or by threadmilling on a machining center.


Welding inconel alloys is difficult due to cracking and microstructural segregation of alloying elements in the heat affected zone. However, several alloys have been designed to overcome these problems.


Inconel Fittings have an excellent mechanical properties and provide good resistance to oxidation. We offer inconel 625 rod, inconel 601 rod, inconel 800 rod, inconel 825 rod and inconel 600 rod. These pipes find extensive application in furnace muffles, electronic components, heat treating equipment, steam generator tubing, heat exchangers, etc.

Length : Single random, double random & cut length

Grades : UNS 8800 (inconel 800) uns 8825 (inconel 825) uns 6600 (inconel 600) uns 6601 (inconel 601) uns 6625 (inconel 625)

Beryllium Copper Round Bar

Beryllium Copper Round Bar

Approx. Rs 2,500 / Kilogram

We are offering Beryllium Copper Round Bar to our clients. One of the highest strength copper-based alloys available on the market today is beryllium copper, also known as spring copper or beryllium bronze. The commercial grades of beryllium copper contain 0.4 to 2.0 percent beryllium. The small ratio of beryllium to copper creates a family of high copper alloys with strength as high as alloy steel. The first of the two families, C17200 and C17300, includes high strength with moderate conductivity, while the second family, C17500 and C17510, offers high conductivity with moderate strength. The principle characteristics of these alloys are their excellent response to precipitation-hardening treatments, excellent thermal conductivity, and resistance to stress relaxation.

Additional Information:
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material


Looking for Pipes And Tubes ?


We will contact you soon !

Rajesh Bhansali


Nascent Pipe & Tubes

Kalamboli, Mumbai, Maharashtra, India

More Categories

View All Categories »
Send SMS
Contact Us